|
Specification
|
Yes
|
No
|
Other/Specify
|
|
Finishing
mower to have a cutting width of 77 Inches
|
|
|
|
|
Finishing
mower to have an overall width of 79.5 Inches
|
|
|
|
|
Blades
to be of an offset design of 5/16" x 2 1/2" x 27".
Blades to be high lift, heat treated, alloy steel blades.
Height adjustment to be done by means of spacer bushings that
allow adjustment without tools.
|
|
|
|
|
Blade
RPM to be 2659.
|
|
|
|
|
Blade
tip speed to be 18786 F.P.M.
|
|
|
|
|
Blade
design to have an overlap of 1 3/4"
|
|
|
|
|
Mower
to have a cutting height range between 1 to 5 inches.
|
|
|
|
|
Tires
to be pneumatic type with a size of 13" x 5" x 6"
|
|
|
|
|
Mower
to have an overall weight of 695 lbs.
|
|
|
|
|
The deck
to be driven by a PTO shaft to right angle gear box driving
2-"B" section belts to 3 heavy spindles using cast
iron pulleys.
|
|
|
|
|
Belt adjustment
to be done by means of four gear box bolts and a slide plate
that moves in a forward and backward motion.
|
|
|
|
|
Deck to
be constructed of 3/16" steel plate, formed and welded
with supporting members at high stress areas.
|
|
|
|
|
Deck to
be 5" deep with a rear discharge.
|
|
|
|
|
Spindles
are to be greaseable from the top without removing the belt
guards.
|
|
|
|
|
The mower
must be equipped with a clevis style, anti-scalp roller.
|
|
|
|
|
Specification
|
Yes
|
No
|
Other/Specify
|
|
Finishing
mower to have a cutting width of 92 Inches
|
|
|
|
|
Finishing
mower to have an overall width of 94.5 Inches
|
|
|
|
|
Blades
to be of an offset design of 5/16" x 2 1/2" x 32".
Blades to be high lift, heat treated, alloy steel blades.
Height adjustment to be done by means of spacer bushings that
allow adjustment without tools.
|
|
|
|
|
Blade
RPM to be 2215.
|
|
|
|
|
Blade
tip speed to be 18547 F.P.M.
|
|
|
|
|
Blade
design to have an overlap of 2".
|
|
|
|
|
Mower
to have a cutting height range between 1 to 7 inches.
|
|
|
|
|
Tires
to be pneumatic type with a size of 15" x 6" x 6"
|
|
|
|
|
Mower
to have an overall weight of 1039 lbs.
|
|
|
|
|
The deck
to be driven by a PTO shaft to right angle gear box driving
2-"B" section belts to 3 heavy spindles using cast
iron pulleys.
|
|
|
|
|
Belt adjustment
to be done by means of four gear box bolts and a slide plate
that moves in a forward and backward motion.
|
|
|
|
|
Deck to
be constructed of 3/16" steel plate, formed and welded
with supporting members at high stress areas.
|
|
|
|
|
Deck to
be 5" deep with a rear discharge.
|
|
|
|
|
Spindles
are to be greaseable from the top without removing the belt
guards.
|
|
|
|
|
The mower
must be equipped with a clevis style, anti-scalp roller.
|
|
|
|
