Ribbon Diameter to be 23.5 inches wide

Overall weight of the Blower not to exceed 860 pounds"

Blower design to be front mounted Category 1 Hook-up

Blower design to have replaceable skid shoes

Prime Mover must have capability to operate at 540 R.P.M. and 1000 RPM

Drum to be a Ribbon Style Cutting Head

Blower to be a two stage design

Second Stage fan to consist of 4 blades with an overall diameter of 23.5 inches.

Fan Housing to be 26 inches in Diameter

Blower to be designed with an open ended box, allowing the head to cut from side to side.

Blower design to accommodate a minimum throwing distance of 65 feet and not less than 1 foot.

Chute design to have a height of 48 inches.

Chute diameter at base of Snow Blower to be 12 inches

Chute design must incorporate a plastic liner to prevent clogging.

Overall height of blower to include 48 inches chute to be 114 inches.

(2) Blades for adjusting chute deflector to be controlled by a hydraulic cylinder.

Blower to have a capability of a 360 degree throwing angle.

Safety and damage prevention to be provided by shear pin protection.

Blower head must be equipped with hydraulic cylinder, enabling the cutting head to roll forward or backwards as required.