Specification

Yes

No

Other/Specify

Blower to be 50" wide x 50 1/2" high (less blower head).

Blower to have an 84" overall height (with chute deflector).

Blower to have two (2) 15" spiral augers and one (1) 24" second stage fan.

Blower to incorporate optional 60" chute extension for Truck Loading.

Chute deflector must operate by means of a double acting cylinder.

Chute to rotate 236 degrees.

Total blower weight (less chute extension) to be 825 lbs.

Attachment must fit a standard category I or II hitch.

Length to be: 39 inches

Cutting edge to be: Þ" x 4" x 50", reversible.

Chute rotation to be: hydraulic and chain # 60

Auger, drive chain to be # 60, adjustable at the idler.

Shear bolts to be located at the PTO drive shaft 3/8" x 3" and at the auger cross shaft 5/16" x 2 Þ".

Hydraulics system to incorporate:
Double acting cylinders
Hydraulic hoses:
3/8" diameter hydraulic hoses with 16,000 PSI bursting rate.

Blower gear box to be constructed as follows: AISI 315 steel input shaft with a standard 1 3/8" spline input. 2" diameter output shaft, supported by tapered roller bearings. The bevel gears are spline mounted onto the shaft.

Operations specifications to be as follows:
Capacity approximately 500 tons/hour.
Chute rotation approximately 236 degrees.

Blower to be 60" wide x 50 1/2" high (less blower head).

Blower to have an 84" overall height (with chute deflector).

Blower to have two (2) 15" spiral augers and one (1) 24" second stage fan.

Blower to incorporate optional 60" chute extension for Truck Loading.

Chute deflector must operate by means of a double acting cylinder.

Chute to rotate 236 degrees.

Total blower weight (less chute extension) to be 865 lbs.

Attachment must fit a standard category I or II hitch.

Length to be: 39 inches

Cutting edge to be: Þ" x 4" x 60", reversible.

Chute rotation to be: hydraulic and chain # 60

Auger, drive chain to be # 60, adjustable at the idler.

Shear bolts to be located at the PTO drive shaft 3/8" x 3" and at the auger cross shaft 5/16" x 2 Þ".

Hydraulics system to incorporate:
Double acting cylinders
Hydraulic hoses:
3/8" diameter hydraulic hoses with 16,000 PSI bursting rate.

Blower gear box to be constructed as follows: AISI 315 steel input shaft with a standard 1 3/8" spline input. 2" diameter output shaft, supported by tapered roller bearings. The bevel gears are spline mounted onto the shaft.

Operations specifications to be as follows:
Capacity approximately 500 tons/hour.
Chute rotation approximately 236 degrees.

Specification

Yes

No

Other/Specify

Blower to be 70" wide x 50 1/2" high (less blower head).

Blower to have an 84" overall height (with chute deflector).

Blower to have two (2) 15" spiral augers and one (1) 24" second stage fan.

Blower to incorporate optional 60" chute extension for Truck Loading.

Chute deflector must operate by means of a double acting cylinder.

Chute to rotate 236 degrees.

Total blower weight (less chute extension) to be 905 lbs.

Attachment must fit a standard category I or II hitch.

Length to be: 39 inches

Cutting edge to be: Þ" x 4" x 70", reversible.

Chute rotation to be: hydraulic and chain # 60

Auger, drive chain to be # 60, adjustable at the idler.

Shear bolts to be located at the PTO drive shaft 3/8" x 3" and at the auger cross shaft 5/16" x 2 Þ".

Hydraulics system to incorporate:
Double acting cylinders
Hydraulic hoses:
3/8" diameter hydraulic hoses with 16,000 PSI bursting rate.

Blower gear box to be constructed as follows: AISI 315 steel input shaft with a standard 1 3/8" spline input. 2" diameter output shaft, supported by tapered roller bearings. The bevel gears are spline mounted onto the shaft.

Operations specifications to be as follows:
Capacity approximately 500 tons/hour.
Chute rotation approximately 236 degrees.