1. Plow to be 22 inches high.

2. Plow to be 60 inches wide.

3. The shipping weight of the plow is to be 460 lbs.

4. Cutting edge to be 1 piece, 1/2" x 5 1/2" x 60" tapered design.

5. Trip system to be of a full trip design using six 11" x 2 1/2" x 1/4 coil springs.

6. The cylinders dimensions are to be 2 1/2" outer diameter, 1/2" diameter ram, double acting.

7. Plow to implement a 4-way cushion valve.

8. Plow to be designed with a mounting stand to allow for easy installation and removal.

9. Plow to implement a category I, 2-point, quick connect and disconnect system.

10. Hydraulic hose connecting ends to implement male flat face couplers.

12. Plow to be capable of angling 30 degrees.

13. Moldboard to be constructed of 1/4 inch steel.

14. Reinforcing structure to be constructed of 3/8" steel.