1. Snow blower type to be two stage, counter clockwise rotation.

2. Snow blower to have a cutting width of 52 inches.

3. Overall width of 52 inches.

4. Overall cutting height of 26-3/16 inches.

5. Height less blower head to be 35 inches.

6. Overall height with chute to be 61 inches.

7. Shipping weight to be 480 lbs.

8. Overall length of 38 inches.

9. Thickness of sides to be 3/16 inch.

10. Snow blower to be constructed of 12-gauge steel.

11. Snow blower to be category I, three-point hitch mounted.

12. Snow blower gearbox to be worm gear style with a 1:1 ratio.

13. Snow blower to implement a #60 auger drive chain.

14. Auger diameter to be 14 3/4 inches.

15. Snow blower fan to have a diameter of 23 3/4 inches.

16. Fan to be designed with 4 blades.

17. Snow blower chute's rotation to be done by means of hydraulic motor and attached gear.

18. Snow blower to implement an adjustable chute deflector.

19. Cutting edge to be 1 piece, 1/2"x2"x52", replaceable. Adjustable skid shoes.

20. Snow blower to incorporate 1 shear pin on the driveshaft and 1 on the driveline after the gearbox.